background image

www.ventilation-system.com

5

TECHNICAL DATA 

The ventilator is rated for indoor application.

The ventilator is rated as a class II electric appliance. 

The ventilator design is regularly improved, so some models may slightly differ from those ones described in this manual.

TwinFresh Easy RL-50-7

TwinFresh Easy-D RL-50-7

Speed 

I

II

III

I

II

III

Supply Voltage, 50-60 Hz [V]

1~100-240

Power consumption [W]

0.90

2.65

6.70

2.17

4.58

12.19

Total current consumption [A]

0.018

0.035

0.071

0.030

0.053

0.115

RPM [min

-1

]

1070

1880

2920

1070

1880

2920

Air capacity [m

3

/h] (CFM)

15 (9)

30 (18)

50 (29)

15 (9)

30 (18)

50 (29)

Filters

G3 (MERV 7); F8 (MERV 13) option

Transported air temperature [˚C] (˚F)

from -30 (-22) to 50 (122)

Noise level, 1 m [dB(A)] (Sones)

24 (0.6)

31 (1.0)

34 (1.2)

24 (0.6)

31 (1.0)

34 (1.2)

Noise level, 3 m [dB(A)] (Sones)

15 (0.3)

22 (0.5)

25 (0.6)

15 (0.3)

22 (0.5)

25 (0.6)

Noise level attenuation [dB(A)] (Sones)

41 (2.5)

Heat recovery efficiency [%]

97

90

82

97

90

82

Ingress protection rating

IP24

The air duct length and the internal grille model 

depend on the ventilator model. For details, please refer 

to the Designation Key, page 4.  

External grille may be replaced with an outer 

ventilation hood. 

Overall dimensions of the ventilation hood are stated 

in the mounting instruction for respective ventilation 

hood. 

Internal grille 

External grille 

Ø200 mm (Ø7 

7⁄8

")

Air duct length 

Ø

160 mm  (

5⁄16

")

V127EN-01.indd   5

29.03.2016   9:56:05

Summary of Contents for TwinFresh Easy RL-50-7





















Reviews: