background image

1

IMPORTANT INFORMATION 

Please carefully read the Instruction Manual before using the infrared heater. 
This Instruction Manual contains the important information on your safety, as well as 
some recommendations on proper use of the appliance and its maintenance. 
Keep the Instruction Manual along with the warranty card, sales receipt, and if 
possible, cardboard package and packing material. 
The purchased infrared heater may somewhat differ from one described in the 
Manual, but this does not affect the methods of use and operation. 
Important precautions and instructions given in this Manual do not include all 
possible modes and situations which can be encountered. It is necessary to 
understand that common sense, cautiousness, and carefulness are the factors which 
cannot be "integrated" to any product.

1. SAFETY INSTRUCTIONS

Ÿ

Read the instruction before using. 

During use of the infrared heater, it is 

      necessary to observe some precautions. Improper operation with disregard of      
      precautions may result in infliction of harm to health of the user and other 
      people, as well as in infliction of damage to their property. 

Ÿ

Use only the voltage specified on the rating sticker on the heater.

Ÿ

ONLY connect the appliance to a properly installed socket-outlet with earth  

      contact.

Ÿ

The unit must be handled with care, and avoid vibration or hitting.

Ÿ

WARNING: FIRE RISK EXISTS IF THE HEATER IS COVERED BY OR POSITIONED CLOSE 

      TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS

.

Ÿ

Do not use the appliance in areas where gasoline, paint or other flammable   

      liquids are used or stored.

Ÿ

Do not use the appliance in particularly dusty and explosive areas.

Ÿ

Do not use the appliance in a building site, green house, barn or stable where

      there's flammable dust.

Ÿ

Do not use the appliance as a sauna heater.

Ÿ

Do not use this unit in the place of animal propagating and rising.

Ÿ

Warning: Do not touch the radiating plate. To avoid burns, do not touch the 

      appliance surface by hand and other body parts. It is also necessary to exclude the 
      possibility of touching the heater radiating boards by a person (including   
      accidental) via proper instructions and allocation of the heater in an inaccessible 
      place.It stays hot for a period after shut down. Potential danger would occur 
      when touching it during this period.

Summary of Contents for Heatwave Series













Reviews: