22
Setup Steps
Dry Contact Use
(setup step 23)
Condensate Pan -
If condensate pan is
selected; when the Dry Contact is active, the
thermostat will lockout compressor terminal(s)
and “CONDENSATE PAN” will appear on the display.
Unoccupied
- If unoccupied is selected; when the dry contact is active,
the thermostat will be forced into Unoccupied settings.
FDD -
If FDD is selected; when the dry contact is active, “EQUIP FAULT”
will appear on the display.
Occupied -
If Occupied is selected; when the dry contact is active, the
thermostat will be forced into occupied settings.
OFF
- If OFF is selected; when the dry contact is active, the thermostat will
be set to off.
Dry Contact Operation
Dry Contact Polarity
(setup step 22)
Open (Normally Open)
- The dry contact is open
until the connected device closes the circuit.
Closed (Normally Closed)
- The dry contact is
closed until the connected device opens the circuit.
Dr
y
Contact
‘Idle’
‘Active’
Dr
y
Contact
Dr
y
Contact
‘Idle’
‘Active’
Dr
y
Contact
Dr
y
Contact
‘Idle’
‘Active’
Dr
y
Contact
Dr
y
Contact
‘Idle’
‘Active’
Dr
y
Contact
Summary of Contents for EXPLORER Mini T2100
Page 40: ...P N 88 1193 09 05 19 ...
