14
Setting the Clock and Day
(setup steps 1-2)
When your thermostat is connected to Skyport Cloud Services, the
time and day of the week are controlled by Skyport. There is no local
adjustment, Skyport also adjusts the time for Daylight Savings Time as well.
To set the time and day when not connected to
Skyport; enter the setup screens by pressing the
MODE
button and simultaneously pressing the
FAN
button for 5 seconds.
Setup step 1
adjusts the clock. Use the Warmer/Up
or Cooler/Down buttons to adjust the time.
Press the
MODE
button to advance to
step 2
.
Select the day of the week using the Warmer/Up
or Cooler/Down buttons.
Leave the setup screens by again pressing the
MODE
button and simultaneously pressing the
FAN
button for 5 seconds.
Show Clock
(setup step 3)
This setup step will allow for removal of the
clock and day of the week from the display.
OFF removes the time and day from the display.
Programmable
(setup step 4)
When the very simplest operation is desired,
this thermostat may be configured to be non-
programmable, with or without Auto-Changeover.
If “ON” is selected, the thermostat will lockout the
Program On screen; only the Off, Heat, Cool and Auto
screens may be accessed by pressing the
MODE
button.
Select “OFF” if you would like your thermostat to be
programmable, then the Program mode will be
accessible through the use of the
MODE
button.
Setup Steps
Summary of Contents for EXPLORER Mini T2100
Page 40: ...P N 88 1193 09 05 19 ...
