8. NON-DUCTED (R
ECIRCULATION
)
(
CONT
’
D
)
8.5 I
NSTALL
THE
C
HARCOAL
F
ILTER
1.
Using a no. 2 Phillips screwdriver, remove the 3 grille
retaining screws (located on top of the grille).
2.
Open the door.
3.
Push the grille left, then pull straight out to remove.
4.
Slide the charcoal fi lter into place. The fi lter should rest at the
angle shown beside. When properly installed, the wire mesh of
the fi lter is visible.
5.
Reinstall the grille and its screws.
6.
Close the door.
7.
Proceed to step 10 to fi nalize the installation.
9. HORIZONTAL DISCHARGE
I
NSTALLATION
OVERVIEW
9.1
Prepare rear wall
9.2
Attach mounting plate to wall
9.3
Prepare top cabinet
9.4
Adjust blower
9.5
Mount the microwave oven
9.1 P
REPARE
R
EAR
W
ALL
You need to cut an opening in the rear wall for horizontal discharge.
1.
Read the instructions on the rear wall template.
2.
Cut the opening, following the instructions on the rear
wall template.
MO0021A
C
HARCOAL
FILTER
MO0022
18
MH0002
MD0012
