9. HORIZONTAL DISCHARGE
(
CONT
’
D
)
9.4 A
DJUST
B
LOWER
(
CONT
’
D
)
3.
Remove and set aside the blower motor retaining screw. Carefully
pull out the blower unit. The wires will extend far enough to allow
blower unit adjustment.
4.
Roll the blower unit 90˚ so that fan blade openings are facing
toward the front of the microwave oven.
5.
Flip blower unit 180˚, so that the fan blade openings are facing
toward the back of the microwave oven.
6.
Install the blower unit back in place.
7.
Secure blower unit to microwave with its retaining screw.
NOTE: The blower unit exhaust openings should match exhaust openings on rear of microwave oven.
MD0014A
A
FTER
: F
AN
BLADE
OPENINGS
FACING
BACK
E
ND
A
E
ND
B
E
ND
B
E
ND
A
B
EFORE
: F
AN
BLADE
OPENINGS
FACING
UP
B
LOWER
MOTOR
RETAINING
SCREW
20
CAUTION
Do not touch the blower blades to prevent cracks and
breaks. Hold outer case when handling the blower.
CAUTION
Do not pull or stretch the blower unit wiring. Ensure the wires are not pinched.
