13
The WG hood model glass panels are sold separately and have to be installed before completing
the hood installation.
For each glass panel:
1. Carefully remove glass panel from its packaging.
Remove glass panel nuts (factory installed) from both studs and set aside.
2.
Insert glass panel studs in
appropriate hood holes (some
parts not illustrated to ease
understanding).
NOTE: Install the glass panel with
the control pictograms on
the front of the hood.
3.
While holding glass panel,
pre-tighten previously removed
nuts by hand. Ensure glass
panel is centered. Then, using a
3/8" socket, tighten nuts completely.
8. INSTALL GLASS PANELS
(WG MODEL ONLY)
HD0438
N
UT
G
LASS
PANEL
STUD
9. INSTALL
HOOD
WARNING
!
BE CAREFUL when installing the decorative flue and hood, they may have sharp edges.
CAUTION
DO NOT REMOVE the protective plastic film covering the decorative flue (upper and lower)
and the hood yet.
1
2
HD0435
1. Slide the upper flue up to the ceiling and secure it to the
ceiling mounting bracket using 2 no. 8 x 1/2" quadrex screws.
NOTE: Ensure upper and lower flue seams are aligned
B
.
Carefully slide the lower flue over the upper flue up to the
ceiling and have the second person hold it up
C
while
performing step 2.
