11
1. Remove both screws retaining the electrical
box cover. Remove the latter by sliding it in the
direction indicated by the arrow. Set cover and
screws aside.
6. ASSEMBLE
ANGLE
BRACKETS
(CONT'D)
4. Make sure all brackets are straight
and blower box is level and square
(as shown at right), then tighten all
screws.
HD0420
F
RONT
OF
THE
HOOD
F
RONT
OF
THE
HOOD
C
ORRECT
I
NCORRECT
S
IDE
VIEWS
OF
THE
BLOWER
BOX
7. CONNECT
WIRING
WARNING
!
Risk of electric shock. Electrical wiring must be done by qualified personnel in accordance
with all applicable codes and standards. Before connecting wires, switch power off at
service panel and lock service disconnecting means to prevent power to be switched on
accidentally.
2.
Install wire clamp (included) on top of
blower box. Attach the adapter/damper to
the blower box using 4 no. 8 x 3/8" quadrex
screws (included). Remove tape on damper.
(Angle brackets not illustrated to ease
understanding).
HJ0068
HD0441
S
CREW
LOCATIONS
