36
MANUALE TECNICO / TECHNICAL MANUAL
REMAINING CREDIT INFO (feature available only for the Italian mobile network operators TIM
and WIND)
ENABLING: to enable remaining credit info, you just need to send an SMS of configuration, but the text
message depends on the mobile network operator from the installed SIM:
OPERATOR
TEXT MESSAGE
TIM
?CR2?40916?PRE CRE SIN?”
WIND
?CR5?*123#?
CTH-18 will then send a confirmation SMS for correct activation.
PLEASE NOTE: If credit is less than 5€, you just need to send the SMS “CC”. CTH-18 will then
send a confirmation SMS for correct activation.
DISABLING: to disable remaining credit info, you just need to send the SMS “CC”. CTH-18 will then send
a confirmation SMS for correct deactivation.
CONTROL TOOLS
ATTENTION: If you do not want to receive the confirmation after each managing control sent, it
is necessary to add “-n” at the end of the text message.
TAB.3 – BASIC COMMANDS FOR THE MANAGEMENT
COMMAND DESCRIPTION
TEXT MESSAGE
ANSWER DESCRIPTION
Total arming
“ON”
System status with possible anomalies
Partial arming
“OP”
System status with possible anomalies
Disarming
“OF”
System status with possible anomalies
System status
“ST”
System status with possible anomalies
Output activation
“AU”
Activation confirmation
Output deactivation
“DU”
Deactivation confirmation
Output status
“TU”
Output status
Flash anomalies reset
“CL”
Reset confirmation
Temperature
“TM”
Approximate environment temperature
TAB.4 – ADVANCED COMMANDS FOR THE MANAGEMENT
COMMAND DESCRIPTION
TEXT MESSAGE
ANSWER DESCRIPTION
Maintenance mode activation
“TE1”
Confirmation of sent command
Maintenance mode deactivation
“TEØ”
Confirmation of sent command
Numbers unlock activation
“SB1”
Confirmation of sent command
Numbers unlock deactivation
“SBØ”
Confirmation of sent command
Reset to default
“RI7392”
Confirmation of reset performed
