background image

 

24

USING THE OVEN FUNCTION KNOB 

(Fig.31A-31B-31C)

 

The oven function knob installed in the multifunction oven models is used, along with the thermostat, to control the 
electric fan and the oven elements since they can be turned on by turning the oven function knob and the thermostat 
knob. Turning just one of the two knobs will not have any effect on the oven except to turn on the oven light or the 
electric fan when selected. The electric oven is heated by 4 elements: one on the bottom, two on the top or one circular; 
turning the oven function knob turns on the element relative to the symbol indicated on the ring but to be activated the 
thermostat knob must be turned until the orange light turns on indicating that the element has been turned on. Placing 
the oven function knob on any of the nine operating modes turns on the oven light, together with the relative element. 
Once the temperature and the elements to be used have been set, the oven elements are turned on and off by the 
thermostat; therefore, it is normal for the orange light to turn on and off while the oven is working. 
To turn off the electric oven set the oven function knob to position 0 to prevent the thermostat from controlling the 
elements. Setting the thermostat knob to position 0 turns off the elements but it is still possible, using the oven function 
knob, to turn on the electric fan and the oven light. 
The knob has 9 different fixed positions corresponding to 9 different types of oven operation: 
 

 

 

 

Fig. 31A 

               Fig. 31B    

         Fig. 31C 

 
For type VEF61EG: 
 

 or 

 indicates that only the oven light is turned on;

 

 or 

 indicates that the bottom element (1300W) and the top external element (900W) have been turned on; 

 or 

 indicates that only the top external element (900W) has been turned on; 

 or 

 indicates the only the bottom element (1300W) has been turned on; 

 or 

  indicates that only the grill element (2000W) has been turned on; 

 or 

 indicates that the top external element (900W) and the grill element (2000W) have been turned on; 

 or 

 indicates that the top external element (900W), the grill element (2000W) and the electric fan have 

been turned on; 

 or 

 indicates that the circular element (2400W) and the electric fan have been turned on; 

 or 

 indicates that only the electric fan has been turned on. 

 

For Type VEF91EG: 

 

 or 

 indicates that only the oven light is turned on; 

 or 

 indicates that the bottom element (1800W)and the top external element (1200W) have been turned 

on; 

 or  

 indicates that only the top external element (1200W) has been turned on; 

 or  

 indicates the only the bottom element (1800W) has been turned on; 

 or  

 indicates that only the grill element (18000W) has been turned on; 

 or  

 indicates that the top external element (1200W) and the grill element (1800W) have been turned on; 

 or 

 indicates that the top external element (1200W), the grill element (1800W) and the electric fan have 

been turned on; 

 or 

 indicates that the circular element (3000W) and the electric fan have been turned on; 

 or 

 indicates that only the electric fan has been turned on. 

 
When the knob is set to one of these nine positions, the oven light is always on, thus indicating that the oven is 
being energised. 

 
 
 
 
 
 

Summary of Contents for VEF61EG
































Reviews: