VENGE VIAS, User Manual

Page: 28 / 36

25
REACHR TOOL:
S165300010
„
Place the stem faceplate against the handlebar ( see fig.8, page 9 ) and insert the stem bolts through the
handlebar. Make sure the housings aren’t interfering with the bolts going through the handlebar. The bolts can
be positioned above or below the housings.
„
Before tightening the bolts, align the handlebar rotation position (as outlined in Chapter 1, Section A. “DETERMINING
FIT”, page 7 ) and make sure it’s centered left-to-right, then tighten the stem faceplate bolts to 100 in-lbf (11.3 Nm).
5
SHEATH FLANGE
SHEATH
„
Fig.5: Once the handlebar and stem are assembled, the shift cable sheaths will extend slightly out the base of the steerer
tube clamp area.