Machine Back View
20.
Spool Pin
21.
Bobbin Winder
22.
Carry Handle
23.
Hand Wheel
24.
Foot Controller Input
25.
Power Cord Socket
26.
Power Cord
27.
Foot Controller
28.
Presser Foot Lifter
29.
Light Switch & Built-in
sewing light
30.
Faceplate
31.
Thread Spool
32.
Bobbin Case
PRINCIPAL PARTS AND WHAT THEY DO
1.
Thread Tension Dial
lets you select just the right tension for your stitch, thread
and fabric. Tension discs, inside the machine, regulate the amount of tension on
the needle thread. The thread tension dial is numbered from 1 through 9. The
lower the number, the looser the tension is on the needle thread. The higher the
number, the tighter the tension is on the needle thread. The settings of 3, 4 and
5 are marked with a box around the number, indicating the settings at the
range at which most of your sewing will be done.
2.
Thread Take-Up Lever
controls the flow of the needle thread. The self-threading
eyelet simplifies the threading of the take up lever.
3.
Thread Cutter
is built-in at the side of the machine for convenience. Use this to
trim thread tails quickly and easily when completing a seam.
4.
Reverse Lever
instantly reverses the stitching direction. Simply press the lever all
the way down and hold in place. Release it to resume sewing forward.
5.
Presser Foot
holds the fabric against the feed dogs. Use the presser foot lifter to
lower the presser foot to begin sewing or to raise the presser foot if you wish to
