COMBI VENDOR • 3532
| 9
AUGER TIMING
SNACK/CANDY/FOOD TRAY
Each auger can be rotated in 20° (degree) increments for a different product vend drop-off
point. Most items can be vended successfully when the auger end is positioned at 6
o'clock.
The general rule is -
the narrower the
product, then the higher the timing.
•
Thick Products - 4-6 o’clock
•
Most products – 6 o’clock
•
Thin Products - 6-8 o’clock
TO
CHANGE AUGER TIMING
1. Remove the motor cover. See Figure 6f.
2. Raise the motor slightly and pull forward on
the auger until it separates from the motor.
3. Rotate the auger to the desired position and
re-insert the hub (auger coupling) into the
motor. The hub (auger coupling) must be
seated over the vertical rail or retaining rib
on the tray.
4.
Replace the motor cover making sure it is
securely tightened.
5.
Test vend to make sure product vends
correctly.
CAN/BOTTLE TRAY OPTION
1.
Remove the hitch pin. See Figure 6g.
2.
Pull hub and auger away from the motor.
3.
Rotate the hub and auger.
4.
Re-insert the hub and auger.
5.
Re-insert the hitch pin.
6.
Test vend to make sure product vends
correctly.
Figure
6f. Motor & Auger
(Standard Tray)
Figure 6g. Motor & Auger
(Can/Bottle Tray)
