COMBI VENDOR • 3532
| 19
7.7.4 TIME DISPLAY
This option will display the time and date. Programmable POS does not have to be
“ON” for this to work.
Default Password 2314
Default is OFF
STEP
DISPLAY
1.
Press Service Mode Button
Motors ( - - )
2.
Press
and enter password
3.
****
Press
Programmable
POS
4.
Press
to enter time display
menu
Time Display:
OFF
5.
Press
to toggle on and off
Time Display: ON
6.
Press
to save
Time Display: ON
7.
Press
4 times to exit
Sales Mode
7.8 SHUTDOWN
This option allows the controller to shut down a range of selections or the entire
machine based on four (4) time-of-day intervals. If the time falls within one of these
intervals and the entire machine has been selected for shutdown then the message
VENDING OPERATION TO RESUME AT hh.mm
is displayed.
8 TEST VEND
Use this menu to test vend individual motors. The selection will display with the test
vend. If a test vend attempt on a particular motor fails, controller will beep.
STEP
DISPLAY
1.
Press Service Mode Button
Motors ( - - )
2.
Press
Item - - -
3.
Press selection number on keypad and wait
Item 010
4.
Repeat step 3 for other selections.
5.
Press
3 times to exit.
(Sales Mode)
TEST ALL MOTORS
This menu will test vend all motors. The selection will display with the test vend. If a
test vend attempt on a particular motor fails, then the controller will beep. Satellite
machines will also be included in the test.
NOTE:
Pressing
at any
time will stop the test.
STEP
DISPLAY
1. Press Service Mode Button
Motors ( - - )
2.
Press
and wait.
Item
The motor selection number will
display while it is being tested.
Item 010
3.
Press
3 times to exit.
(Sales Mode)
