12
Figure 8. Coin Tube Location in Coin Mech.
NOTE
The bill validator operation of this vendor
requires the “LO 25¢” option switch to be in
the “Hi” or “OFF” position.
The controller will monitor the condition of the
coin mechanism at all times. Any activity (coins
inserted) will be recorded.
Figure 9. Option Switches and Power Light
Locate the coin mechanism option dip switches
and select from the following settings:
Table 6. Coin Mech Option Switches
SWITCH
ON
OFF
1
USA/CAN
U.S. and Canadian coins
accepted
Canadian coins
rejected
2
LO 25¢
Quarters diverted to the
cash box after the
change tube contains
approximately 8 quarters
Quarters
diverted into the
quarter tube
until it is full
3
$ ACPT
Dollar coins accepted
Dollar coins
rejected
DOLLAR BILL VALIDATOR
(Available in certain U.S. currency markets only)
The BA32SA bill validator contains an option
switch module allowing the unit to be
customized to the requirements of an individual
account.
All validators shipped from the factory will be
set with switches #3 & #8 in the
“ON”
position.
All other switches will be set to the
“OFF”
position. See Table 7.
Summary of Contents for 3120-GF12 II
Page 18: ...16 SCHEMATIC GF12 II P N 4209903...
