2.4. Locating and Installing the UBA Calibration File(s)
Every time UBA Console initializes a UBA Network, it reads the calibration file for each UBA that it detects. If it can’t
locate the calibration file in the VenconUBA\Database&Cal folder, it will put up a Calibration file not found dialog box.
Every UBA comes with a calibration file that can be found on the installation CD or it was emailed to you. Once
located, UBA Console copies it into the VenconUBA\Database&Cal folder so that it can find it next time.
Don’t lose the UBA’s calibration file, but if you do, don’t panic. We keep a copy. If you’ve made it so far you should
see this:
Figure 8: UBA Console with the UBA network initialized (icons are enabled).
UBA Console has now established communications with the UBA(s) and you can start any instrument.
3. Is My Battery any Good? The Battery Analysis
In this chapter, we're going for a quick tour of the UBA and to run a battery analysis. Start up UBA Console and
initialize the UBA Network.
3.1. The Multitester
Before starting a battery analysis, let’s do some exploring. Click on the third icon, which starts the Multitester. The
Multitester is a great place to start, as you can check the battery’s voltage and the operation of the UBA.
Figure 9:
UBA Console ready to start an instrument. Click on the circled icon to start a Multitester.
Page 6
The UBA Let's Get Started Guide
