Vemer Mithos GSM RF, User Manual

Page: 42 / 60

English
- 40 -
Mithos GSM RF Chronothermostat User Manual
Setting the operating mode
It is possible to set the operating mode of the device and even set the timing if you
want to maintain a certain operation only for a certain period of time.
The syntaxes of the commands to send are:
MITHOS ACCESO AUTOMATICO [period] [unit of measurement]
MITHOS SPENTO
[period] [unit of measurement]
MITHOS ACCESO MANUALE [period] [unit of measurement]
where:
MITHOS ACCESO AUTOMATICO for setting automatic operation
MITHOS SPENTO for setting off operation (with possible antifreeze)
MITHOS ACCESO MANUALE for setting manual operation or
[period] indicates any timer period (values between 0 and 99)
[unit of measurement] indicates the unit of measurement for the timer period
(G = days, H = hours)
Note: the parameters [period] and [unit of measurement] are optional.
Note: the rules for the timings are the same as those defined on pages 20-21.
Some examples:
MITHOS ACCESO AUTOMATICO sets automatic operation (no timing)
MITHOS MANUALE sets manual operation (no timer)
MITHOS AUTOMATICO 20 H sets automatic operation for 20 hours, at the end
of which the chronothermostat will switch to off/
antifreeze operation
MITHOS SPENTO 2 G sets off operation for 2 days, at the end of which the
chronothermostat will return to the operation it had before
being shut off (automatic or manual)
The number in the telephone book that sent the command will receive a text
message informing of the chronothermostat status.
Some examples:
MITHOS=ACCESO (AUTOMATICO)
MITHOS=SPENTO (ANTIGELO=DISABILITATO).