English
- 29 -
Mithos GSM RF Chronothermostat User Manual
To perform the configuration of an actuator,
1. select the radiofrequency channel to be configured
2. put the actuator in configuration,
3. press the
“PRG”
button:
• If the writing
“CNF”
is present, pressing
“PRG”
will perform the configuration
• If the writing
“CNF”
is not present, pressing
“PRG”
will show
“CNF”
and pressin
right after will perform the configuration.
Note. It is possible to repeat the configuration procedure with more RF
actuators to be used for simultaneous actions.
To perform a test connection of the device with the remote actuator press the
“ ”
key:
• The writing
“TST”
to indicate the test in progress
• The regulation actuator status is indicated by
“ON”
/
“OFF”
In this menu the
“TST”
option (connection test) performs ON / OFF actuations
every 10s or for a maximum duration of 15’.
Pressing the
“ ”
key the test phase ends.
To perform an ON / OFF actuation of the remote actuator press the
“ ”
key. The
status of the
“ON”
/
“OFF”
actuator. It is possible to change the remote status
remotely (see page 43 “Setting the status of a remote actuator”).
Summary of Contents for Mithos GSM RF
Page 1: ...Cronotermostato Digitale Mithos GSM RF Manuale d Uso User Manual DIGITAL CHRONOTHERMOSTAT...
Page 2: ......
Page 56: ......
Page 59: ......
