0
960
9600 baud ODD parity 1 stop
1
480
4800 baud ODD parity 1 stop
2
240
2400 baud ODD parity 1 stop
3
120
1200 baud ODD parity 1 stop
4
96E
9600 baud EVEN parity 1 stop
5
48E
4800 baud EVEN parity 1 stop
6
24E
2400 baud EVEN parity 1 stop
7
12E
1200 baud EVEN parity 1 stop
8
96N
9600 baud EVEN parity 2 stop
9
48N
4800 baud EVEN parity 2 stop
10
24N
2400 baud EVEN parity 2 stop
11
12N
1200 baud EVEN parity 2 stop
English
5 PWM regulation
with relay output 1 in reverse and relay output 2 in direct,
set-point 1 and differential 1 plus dead band if applicable
6
change-over between outputs in direct (with set-point 1 and differential 1) and
outputs in reverse (with set-point 2 and differential 2) from digital input
7
outputs in direct with change-over between set-point 1/differential 1 and set-
point 2/differential 2 from digital input
8
outputs in reverse with change-over between set-point 1/differential 1 and set-
point 2/differential 2 from digital input
9
relay output 1 in reverse
with set-point 1 and differential 1 and output relay
2 in direct with set-point 2 and differential 2
10
if one relay output:
alarm function
if two output relays:
relay output 1 in
reverse
(with set-point 1, differential 1 and dead band) and
relay output 2
in alarm
11 – (not available)
12 special mode
(31)
Parameter
value
serial parameter
In order to make internet connections easier, the following meaning applies to
status information found in the COM menu for OUT1 and OUT2 output:
- OUT1: if lit it indicates accurate reception of bus frame with the parameters set
- OUT2: if lit it indicates serial transmission is in process
- 47 -
User Manual – Thermoregulator FHT
