VEMCO - VR2W Manual
18
Select one of the three options displayed.
•
ERASE:
when the data stored in the VR2W has already
been offloaded and you wish to erase the data and begin a
new study.
•
OFFLOAD:
when the data has not been offloaded from the
VR2W or if there is any uncertainty about the data being
offloaded.
•
CANCEL
: when you wish to continue the study that is
currently running in the VR2W receiver. No changes to the
study will be made.
STEP 3
WARNING
Initializing the VR2W will erase
the receiver’s memory.
Retrieve
all detection logs before the
VR2W is initialized.
CAUTION:
Verify the receiver you are communicating
with is
the intended unit
, particularly before
initializing and erasing receiver memory files, or data
could be lost. Communication can occur with any
VR2W with
Bluetooth®
wireless technology activated
within a 10 meter range (typical range in air).
Enter a description of the study in the Study Configuration window. The station name is optional and can be
selected from a list of existing stations (if a database is open) or by simply typing in the “Station Name” line to
create a new station. If this station is a fixed position, then click a check mark in the “Fixed Station Position”
box and enter the latitude and Longitude. If the fixed location information is already entered for an existing
station, then the lat/long data will appear as soon as the station name is selected from the drop-down list.
STEP 4
Choose unique station
names for each
deployment location.
Select Fix Station
to enter lat/long
location of VR2W.
Enter a
description/title for
this study.
Select or enter a station
name.
Advanced
Settings includes
changing the map
and blanking
interval.
Click OK to put the VR2W in Recorder
Mode and begin the study.
Create a new station by
entering the name in
the Station Name line.
WARNING
Incorrectly changing the Advanced
Settings can prevent the VR2W
from hearing your tags. Only do so
under VEMCO’s direction.
How do I know the VR2W is recording?
Watch the red Status Light (LED). Two quick,
bright flashes every 5 seconds indicate the
VR2W is in Record Mode.
