VEMCO - VR2W Manual
37
It is vital that the PC clock be correctly
set to your local time, including time
zone,
before the VR2W is initialized
.
Retrieve all detection logs
before
the
VR2W is initialized; receiver’s memory
will be erased.
6.6
Map Updating
Occasionally, VEMCO releases a new coded map. Updating the map in the VR2W is
as simple as starting a new study with the new map selected. Follow the basic steps
below to start a study with the new map. More details on how to initialize the
receiver is found in section 3.4.1.
1.
Download the latest VUE software from
www.vemco.com/downloads/
.
2.
Communicate with the VR2W receiver (sections 3.2 and 3.3).
3.
Click the red and blue “Start Recording” button found in the
receiver tab’s ribbon. If you have more than one receiver connected
to VUE, then make sure you have the tab of the desired receiver
selected.
4.
Verify that the PC clock is correct. The receiver will be set to UTC time based on the current time of the
PC. The PC time
and the UTC offset
must be correct.
5.
Select to erase the old data and begin the study – only select this option if the data has already been
offloaded to the computer.
6.
Select “Show Advanced Settings” in the Study Configuration
window.
WARNING
Setting up a receiver
with an incorrect map
may result in no
detection data.
