VEMAG ROBOT HP7E, Operating Instructions Manual, Page: 53 / 182

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E 6. Graphical control
6-7 © VEMAG 2010
6.3 Keypad
6.3.1 Numerical keypad
Numerical values are entered using the numerical keypad. Every value
entered must be confirmed with Enter.
6.3.2 Key C (Cancel)
Key C (Cancel) performs the following functions:
• back to main screen
• cancel input and exit
• exit window and menus without input
6.3.3 Screen up/down keys
Use the two arrow keys to switch pages and scroll through fields and
lists. A scroll bar is shown when you scroll.
Menu items followed by ".." show that more pages follow.
6.3.4 Padlock key
The padlock key performs the following functions:
• Open program locking/ userkey
You can use program locking to block entry for almost all parameters.
You can use the userkey to block/release access to Service functions.
6.3.5 Plus/minus keys
• Use the plus/minus keys to increase or reduce values by 1.
• You can also use the minus key to put the symbol in front
of negative input.
Enter the value in question before putting in the symbol
(e.g.: "5" first, and then "-" to set clip offset).
6.3.6 Cursor keys
The arrow keys in the cursor field are used to move the cursor around the
screen. The marking for an active field indicates the position of the cursor.
You can also use the cursor keys to navigate around menus.
6.3.7 Enter key
The Enter key is used to confirm all input.