VEMAG ROBOT HP7E, Operating Instructions Manual, Page: 103 / 182

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E 6. Graphical control
6-57 © VEMAG 2010
6.7.1 Service pages
On the Service pages you will find general information about the version
of the terminal, the drive controllers and the filler.
Make a note of the current version numbers so that you can quote them
in the event of a VEMAG Customer Service query.
The operating hours which have been clocked up are shown at the
bottom of the page.
Warning!
Put a tick in the corresponding field when you carry out a service.
This sets the date for the next service. If no tick is put in the field,
the message "00850 Perform maintenance!" will appear each time
the machine is started up.
You have read-only access to all the Service pages. The Service pages
are released by the userkey.
Section 6.5.6