VEMAG ROBOT HP7C, Operating Instructions Manual, Page: 60 / 94

7. Maintenance
7-4
ROBOT HP7C / HP10C / HP15C / HP17C
© VEMAG 2004
7.5 Daily maintenance
7.5.1 Feed unit seals (lubrication)
The feed unit seals must be lubricated daily every time they are cleaned.
Use only high-performance grease which is safe for food use.
• Carefully press the sealing ring into the appropriate groove in the
hopper flange. Fit the sealing ring without greasing it.
Section 6.2.6
• Lubricate the sealing ring (1) and the sliding ring (2) in the hopper
flange by hand before the feed screw is fitted.
1 Sealing ring
2 Sliding ring
Fig. 7-2
Lubricating the feed unit
seals
2
1