VEMAG ROBOT HP7C, Operating Instructions Manual, Page: 17 / 94

2. Description ROBOT HP7C / HP10C / HP15C / HP17C
2-5 © VEMAG 2004
The following controls are arranged on the control panel on the front of the
machine next to the
portioning computer:
• ON switch (1)
• OFF switch (2)
• UP key (3) for lifting/tipping device (optional)
• STOP key (4) for lifting/tipping device (optional)
• DOWN key (5) for lifting/tipping device (optional)
• Vacuum display (6)
• Vacuum control valve (7)
• Cleaning plug (8) for vacuum line
ON key
This key switches on the drive of the machine.
OFF key
This key switches off the drive of the machine.
UP key (optional)
This key raises the trolley hoist of the lifting/tipping device (optional). In the
top end position above the hopper, the trolley is automatically tipped and
emptied. After 30 seconds have elapsed, the trolley hoist can be lowered
again using the DOWN key. If it is to be lowered before that, the STOP key
has to be pressed first.
1 ON switch
2 OFF switch
3 UP key (optional)
4 STOP key (optional)
5 DOWN key (optional)
6 Vacuum display
7 Vacuum control valve
8 Cleaning plug
Fig. 2-7
Machine control panel
1
6
2
7
3
4
5
8