Velux GGL INTEGRA, Directions For Use Manual

Page: 36 / 50

70 VELUX VELUX 71
Menu
No. 1
Window
Locate
P1 P2
Enter Back
P1 P2
Register product
Copy system
security key
Configure
Menu
No. 1
Blind
Locate
Enter
P1 P2
Enter Back
P1 P2
NEW PRoduCts
Room 1
modified
system settings
No. 1
Room 1
Room 2
New Room
House
systEm sEttiNgs
auto sEt-uP
House
PlaCE iN
iNFoRmatioN
BliNd
New products
registered
iNFoRmatioN
Registering new products
When a new additional product has been installed, it can
be registered in a remote control already in operation.
This new product can for instance be a new INTEGRA or
solar roof window, a blind or a roller shutter.
The example shows how to register a new roller blind in
the remote control and place it in Room 1.
1
Prepare the product for registration.
Disconnect the mains or battery supply for 1 minute and
then reconnect it. The product can now be registered in
the remote control within the next 10 minutes.
2
Press "Menu" in the remote control already in oper-
ation.
3
Select the submenu:
4
Press to highlight "Register product".
Press "Enter" to confirm your choice.
5
Registration is running. This can take up to two minutes.
6
The display shows that the new product has been regis-
tered.
Now the product must be placed.
Note: If the new product is a roller shutter or an awning
blind, you will via
Hint
be offered automatic control of
sunscreening, see section EnergyBalance .
7a
If no Rooms have been created, the product is automat-
ically placed in House.
Operation can start.
7b
If Rooms
have been
created, the product has to be
placed in the appropriate Room.
The display shows a list of new products. The individual
products can be identified by pressing
for a short
period of time. This will activate the product briefly.
Press
to highlight the product to be placed.
Press "Enter" to confirm your choice.
8
Displays a list of the Rooms created.
Press
to highlight the Room in which the product is
to be placed.
Press
"Enter" to confirm your choice.
9
The display shows that the Room has been modified.
Operation can start.
Where more than one remote control is used, new prod-
ucts can also be operated with these. To do this, register
the new products in each remote control by repeating
items 2-9 for each of them.