15
Getting Started
V. CONNECTING TO WI-FI
If the Wi-Fi router is not found automatically, you may need to scan again by
tapping Menu > Scan.
If scanning appears ineffective, turn off Wi-Fi and turn it back on again, then
scan again.
If your connection tends to drop frequently, be sure that the signal strength
is not too weak or not in range, understanding that other radio devices like
cordless phones may interfere with the signal quality.
Some Wi-Fi signals, though listed as unsecured, may still block connections
using MAC address filtering. This will need to be disabled in the Wi-Fi router,
or the device’s MAC address will need to be added to the router as an
acceptable device connection. You can find the CRUZ T410’s MAC address
under the Wi-Fi settings > Menu > Advanced.
Some Wi-Fi signals (public hot-spots, hotels, hospitals, airports, etc) appear
to be unsecured, but require security credentials upon opening a new web
browser. You will need to agree to a terms of use before getting full web
access.
