15
USING THE FREEWAVE FUSION AS A REMOTE SHUTTER RELEASE
Connecting the Camera:
In order to use the remote shutter release
function, you will need to use the included
Fusion shutter release cable.
1.
Plug the 2.5 mm side of the cable into
the Receiver.
2.
Plug the other side of the cable into your
camera’s shutter release terminal.
3.
Mount the Receiver on your camera’s
hot shoe, facing forwards or backwards.
If your camera’s hot shoe is in use, you
can use an accessory shoe to attach the
Receiver to your camera, tripod, or other
suitable surface.
Note: If you are mounting a flash on your
camera, mount the flash directly onto your
camera’s hot shoe. The Fusion Receiver can
be mounted on a straight bracket. DO NOT
MOUNT THE FLASH ON TOP OF THE FUSION
RECEIVER since the Receiver does not send TTL
signals to the flash.