11
CONNECTING THE LIGHTS
Connecting to a Flash Unit:
1.
Switch the flash’s locking switch to the
unlock position
2.
Insert the flash’s hot shoe foot into the
Receiver’s hot shoe mount
3.
Switch the flash’s locking switch to the
locked position
Connecting to a Studio Light
You will need to use the included Studio
Trigger Cable in order to connect the
Receiver to a studio light.
1.
Plug the 2.5 mm side of the cable into the
Receiver’s output jack.
2.
Plug the 3.5 mm side of the cable into the
studio light remote jack
3.
If your studio light has a 1/4" phono jack,
you will need to use the included 2.5 mm
to 1/4" phono cable.