VRC8 GB
6
SPECIAL MULTI-CODE LEARNING KEYS
The POWER button & buttons S1 to S5 are multi-code keys.
Each can store 5 different codes in sequential fashion.
Some remotes have 2 separate
POWER buttons, (e.g. POWER
ON and POWER OFF). We can
store these two codes under a
single key as a toggle function.
LEARNING STEPS :
(1) Follow the previous learning steps.
(2) When the learning sequence is completed, press the same
special key again and program the second function to be
memorised (max. 5).
REMARK : If more than one memorised button in a multi-code
sequence needs to be changed, the user will have to program all
5 codes again.
MACRO SETTING
The VRC8 has 20 macro memories and automatically transmits
a series of commands when two buttons are pressed : either
MACRO & button 0 - 9 or a device button. Each macro memory
supports a max. of 20 programmed steps. The user can insert a
delay time of 1 to 99 seconds in between steps (default : 0.5
seconds). Some devices will not respond to certain commands
when warming up.
Here is an example of how to program a macro.
(1) Turn on the TV.
(2) Select the video input at the back of your TV.
(3) Switch on the LD.
(4) Open the device drawer of the LD… etc.
(5) Switch on the AV processor's amplifier (delay 5 seconds)
(6) Select the AV's input or output source.
Press the LEARN and then the MACRO button to engage the
MACRO LEARNING MODE. The red LED will blink & you
should input 0 - 9 or press a device button.