background image

VRC8                                                                                       GB

2

INTRODUCTION

Thank you for buying the VRC8 Universal Learning
Remote Control
. We are convinced that this powerful &
flexible unit is able to incorporate the functions of all your
infrared remote controls
.

The unit is very user-friendly thanks to its unique design.
The main function keys are located on the upper portion
and the sub-function keys are hidden by a sliding cover.

The  VRC8 provides memory banks for 10 devices, each
device disposing of a max. of 47 storage keys (including
6 special multi-code keys)
. It also allows users to store
the codes for more than 1 original remote under the same
unit.

The VRC8 is equipped with 20 macro memories. The unit
automatically transmits a series of commands simply by
pressing two buttons : MACRO & button 0 - 9 or a device
button. Each macro memory supports a max. of 20
programmed steps. The user can insert a delay time of 1 to
99 seconds between the various steps (default 0.5 sec.).
Some devices will not respond to a code if the unit is
warming up.

Please read this user manual carefully and enjoy the
programming procedures. You will find this unit to be quite
sophisticated.

Summary of Contents for VRC8









Reviews: