VRC8 GB
8
CLEARING STORED DATA
Upon pressing the CLEAR button, two LEDs will flash in turn.
There are 3 ways of clearing stored data.
(a) clearing a device bank - press a device button to clear all
data for a device
(b) clearing a storage key - press a storage button to clear its
memory
(c) clearing a macro memory - press MACRO button and then 0
- 9 or a device button to clear a macro memory
The unit will automatically exit the CLEARING MODE if no button
is pressed within 15 seconds
KEY-TONE
Pressing the KEY-TONE button switches between the
enable/disable key-tone function.
KEY PAD BACK LIGHTING
The VRC8 is equipped with an automatic light sensing function.
When it is (getting) dark, the back light will come on for 6
seconds whenever the pad is used.
BATTERY-LOW INDICATION
If the battery is low, the unit will still operate but the KEY BACK
LIGHTING function will be disabled in order to save power. We
recommend a change of batteries at this time. As the batteries
fail, the remote will lock all functions until new batteries are
installed.
RESET THE VRC8
Press the RESET button to reset the unit. The RESET button,
however, does not erase previously stored data.