PROMIXCD4 GB
5
Move the crossfader to the left (channel 1) and slide the channel 1 fader to the top adjust the master output to a
minimum level.
Pressing
PLAY/PAUSE
starts the disc and you should now hear music through the speakers. You can now adjust
the master level and also the HF and LF controls.
The procedure for channel 2 is identical, the only difference being that the crossfader should be pushed to the right.
You can now experiment with the special cue, pitch and pitch bend controls as described in more detail below.
11. Pitch & Cue Controls
Pitch Control
This feature allows you to increase or decrease the speed of a track, enabling you to match the BPM count of two
independent tracks. Moving the control up will increase the speed of the disc and vice versa. Set the control to zero
(centre) to play the disc at normal speed.
The PITCH indicator comes on when the
PITCH
button is pressed. Push the PITCH CONTROL up or down to adjust
the playing speed.
Beat Matching Using Pitch Bend
This feature allows you to increase or decrease the playing speed by 8% when the button is held down.
Once the BPM’s are matched you can alternate between discs 1 and 2 without audible transition. Remember to
keep
the button pressed down
or the disc will return to its former speed.
Cue Control
Pressing the
CUE
button will illuminate the Cue LED. You will hear the selected fragment when
PLAY/PAUSE
is
pressed during playback and the CUE function is ON. The SEARCH buttons enable the user to position the disc on
any fragment of any track he chooses. Press the CUE button again to disable the
CUE
function.
12. Specifications
Input Sensitivity
DJ mic
1mV / 600 ohm
Phono
3mV
:
47
Kohm
Line / CD
150mV / 100Kohms
Output Level
Amp
out
(RCA)
1.0V
Rec out (RCA)
0.35V
Power Output
40Wrms (6 ohm)
Harmonic
Distortion
<
0.1%
Frequency Response
20Hz – 20KHz
Headphones
impedances 8-300 ohm
General
Power
Supply
(AC)
230Vac/50Hz
Dimensions
550 (W) x 325 (D) x 190 (H)
Weight
±
18kg
The specifications are subject to change without prior notice.
