Velleman K6001, Manual

Page: 9 / 16

9
Cut off a piece of shrinking tube with a length equal to 5cm
Slide the shrinking tube over the copper wires and OVER the sensor (fig. 1.4)
Heat the shrinking tube using a hair dryer or, better still, using a paint stripper.
Connect the transmitter (type KTY11, KTY81-22 or equivalent) with the points SENSOR of the pcb, using
a piece of screened wire (+/- 50cm). The polarity is of no importance.
Fig. 1.4
Preparing the sensor