Velleman HAA9350, User Manual

Page: 8 / 36

A) Enter Programming Mode with Master Code (Exit-Factory Master Code: 0 0 0 0)
Entry of Master Code Confirm Comments
 
Set system to Programming Mode
NOTE: Factory has put a master code

into the keypad before exit-factory, owner may take it
for first �me use.
B) System Refreshing – Installer Programming (Default: 8 9 0 1, Mul�-user mode)
Refresh Code Confirm Comments
 
C) Code Entries – User Programming
1) Recording Master Code and User Codes –
User Programming
(No Default Codes)
Loca�ons User IDs Entry of Codes Confirm Comments

4 to 8 digits

Owner’s Master Code for se�ng system to
programming mode

00 to 99 4 to 8 digits

100 User Codes for opera�ng Output 1

0 to 9 4 to 8 digits

10 User Codes for opera�ng Output 2
2) Recording Super User Code –
User Programming
(No Default Codes)
Loca�on Entry of Code Confirm Comments

4 to 8 digits

Owner’s Mul�-task User Code
3) Recording Duress Codes –
User Programming
(No Default Codes)
Loca�on User IDs Entry of Code Confirm Comments

0 to 9 4 to 8 digits

4) Recording the Visitor Codes – User Programming (No Default Codes)
Loca�on User IDs Opera�onTime Entry of Code Confirm Comments

0 to 9 00 to 99 4 to 8 digits

STANDARD PROGRAMMING SUMMARY CHART
10 visitor codes for opera�ng Output 1.
Opera�on Time:
00 = One �me use only
01 to 99 = Valid within �me
limit of 1-99 hours
10 emergency user codes for actua�ng Output 1 and
Duress Output simultaneously to report user under
duress
Clear all previously stored data and set keypad back to default values except
Master Code
8