2) BASIC WIRINGS FOR DOOR LOCK OPEN AND ALARM ARM-DISARM CONTROL
NOTE:
The door lock function is exactly the same as like the Application Example (1)
Relay Output 2 is used for Alarm Arm-Disarm Control. Please consult your alarm control panel
manual for the appropriate output contact and the operation mode for the control; such as N.O.
or N.C. contact, and Momentary or Start / Stop mode are required.
Connect the Tamper Switch to a 24 hour N.C. zone and the Duress output to a 24 hour N.O. zone
for tamperproof and emergency reporting.
Connect the common ground to link up the keypad and the alarm control panel to achieve the
logical functions is necessary.
Please also see the NOTE stated in Application Example (1) for the common information.
●
●
●
●
●
EG
IN
OUTPUT 1
N.C. COM N.O.
( + ) ( – )
12-24V AC/DC
1 2 3 4 5 6 7 8 9
OUTPUT 2
N.C. COM N.O.
KEY ACT
DU OUT
DOOR SENS
O/P 1 INHIB
INT. LOCK
TAMPER
N.C.
(
−
)
GND
10
11
12
13
14
15
16
17
N.C.
TAMPERPROOF
TO A 24 HOUR N.C. ZONE
ALARM CONTROL PANEL
N.C.
N.O.
COM.
OUTPUT 2
ARM-DISARM CONTROL
* CONSULT YOUR ALARM INSTALLATION MANUAL
FOR N.C. OR N.O. TO CONTROL
N.O.
DURESS -- TO A 24 HOUR N.O. ZONE
( )
COMMON GROUND OF KEYPAD AND ALARM SYSTEM
DK-9350 OR DK-9380
30
