Two groups of user codes can be programmed to operate output 1 and 2 respec�vely. The following
are the programming procedures.
Loca�ons
User ID Entry of Code
Confirm
Output 1
00 - 99 4 -8 Digits
Output 2
0 - 9 4 -8 Digits
NOTE:
●
Loca�ons 1 and 2 are the storage places for the User Codes for Output 1 and 2 respec�vely.
●
100 unique User IDs
00-99
for 100 User Codes for Output 1.
●
10 unique User IDs
0-9
for 10 User Codes for Output 2.
●
The user codes can be 4-8 digits long in manual code entry mode; but must have the same length
as the master code if the keypad is in auto code entry mode.
●
See “Programming Summary Chart” Sec�on C – 1 for more informa�on
●
See informa�on on
Loca�on 82
concerning digit length in Auto and Manual code entry modes.
Programming Example :
1. Set keypad to programming mode with master code and
key. Taking the previous programmed
master code
3 2 8 9
as example here:
2. Program an User Code 8 3 2 1 for output 1 ---------- One of the 100 user codes (user ID: 00-99,
taking ID = 01 as example):
3. Program an User Code 5 4 3 2 1 for output 2 ------- One of the 10 user codes (user ID: 0-9, taking
ID=1 as example):
4. Exit programming mode by pressing the
Operation (Manual Code Entry Mode)
1. Press
---------- Output 1 ac�vates
2. Press
---------- Output 2 ac�vates
NOTE:
In Auto Code Entry Mode only the User Codes that have the same digit length as the master code are
valid and press the
key is not required.
Programming The User Codes (Loca�ons 1 & 2)
13
