ECAMIP701
·
Quick Start Guide
Steps:
1.
Install the memory card.
Note:
Refer to
step 1
in
Section 2.2.1 Wall Mounting
2.
Drill screw holes in the ceiling.
1)
Attach the drill template to the ceiling where you want to install the speed
dome.
2)
Cut a hole and drill screw holes according to the drill template.
Note:
±2 mm of the circle diameter is tolerable.
3.
Route the cables through the ceiling for the speed dome.
4.
Install the bracket on the speed dome.
1)
Place the in-ceiling bracket on the speed dome according to the direction of the
arrow shown in Figure 2-13.
2)
Rotate and tighten the screws on the bracket to fix the bracket with the speed
dome.
Three Screws
Figure 2-13
Install the Bracket
5.
Install the speed dome to the ceiling.
1)
Align the toggle bolts with the screw holes on the ceiling.
2)
Push the speed dome according to the direction of the arrow in Figure 2-14 to
the mounting hole.
Summary of Contents for EtiamPro ECAMIP701
Page 1: ......
