ECAMIP701
·
Quick Start Guide
3.3
Modifying the IP Address
Purpose:
To view and configure the
speed dome
via LAN (Local Area Network), you need to
connect the network
speed dome
in the same subnet with your PC.
Use the SADP software or client software to search and change the IP address of the
device. We take modifying the IP Address via SADP software as an example to introduce
the IP address modification.
Note:
For IP address modification via client software, refer to the user manual of client
software.
Steps:
1.
Run the SADP software.
2.
Select an active device.
3.
Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking
Enable DHCP
.
Figure 3-5
Modify the IP Address
Note:
You can enable the Guarding Vision service for the device during activation. Refer to
Section 5.1 Enable Guarding Vision Service on Speed Dome.
4.
Input the admin password and click
Modify
to activate your IP address modification.
The batch IP address modification is supported by SADP. Refer to the user manual of
SADP for details.
Summary of Contents for EtiamPro ECAMIP701
Page 1: ......
