ECAMIP701
·
Quick Start Guide
Figure 2-11
Safety Rope
2)
Route the cables through the bracket and connect the corresponding cables.
3)
Loosen the lock screws on the bracket.
4)
Align the speed dome with bracket and rotate it to the bracket tightly.
5)
Tighten the two lock screws with the wrench to secure the speed dome and the
bracket.
Figure 2-12
Secure the Speed Dome
4.
Remove the protective film on the bubble after the installation is finished.
2.2.2
In-ceiling Mounting
Note:
⚫
The height of the space above the ceiling must be more than 250 mm.
⚫
The thickness of the ceiling must range from 5 mm to 40 mm.
⚫
The ceiling must be strong enough to withstand more than four times the weight of
the speed dome and the accessories.
Summary of Contents for EtiamPro ECAMIP701
Page 1: ......
