ECAMIP701
·
Quick Start Guide
2
Installation
Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
Notes:
⚫
Do not touch the bubble directly by hand. The image blurs otherwise.
⚫
Do not power the speed dome up until the installation is finished. To ensure the
safety of personnel and equipment, all the installation steps should be done with
power supply off.
⚫
Do not drag the speed dome with its waterproof cables; otherwise, the waterproof
performance is affected.
Figure 2-1
Do Not Drag the Cables
2.1
Installing N4xxx Series Speed Dome
2.1.1
In-ceiling Mounting
Notes:
⚫
The height of the space above the ceiling must be more than 250 mm.
⚫
The thickness of the ceiling must range from 5 mm to 40 mm.
⚫
The ceiling must be strong enough to withstand more than four times the weight of
the speed dome and the accessories.
Steps:
1.
Disassemble the speed dome.
1)
Loosen three screws and remove the bubble.
2)
Remove the protective lens cover, foam, and sticker.
Summary of Contents for EtiamPro ECAMIP701
Page 1: ......
