DVR4MQAE
- 12 -
VELLEMAN
f.
Advance Menu: CAMERA
1.
TITLE:
Move the cursor to the title which you want to change and press “ENTER” to access the setting screen. Assign a
title to each channel (up to six characters (letters or symbols…)); the default title is the channel number.
2.
BRIG / CONT / SATU / HUE:
Adjust the Brightness/Contrast/Saturation/Hue of each channel.
The level is from 0 to 255. The default value of BRIG is 110, others are 128.
3.
COV (COVERT):
Select “YES” to mask the selected channel which is under recording.
When this function is activated, the “COV” words will be shown on the screen.
4.
REC (RECORD):
Select “YES” to enable the record function; Select “NO” to disable the record function.
5.
PRE / NEXT:
Select “PRE” to go to the previous page; Select “NEXT” to go the next page.
NOTE
:
TITLE: 6 characters (letters or symbols…).
BRIG: from 0 ~ 255, the default value is 110.
CONT: from 0 ~ 255, the default value is 128.
SATU: from 0 ~ 255, the default value is 128.
HUE: from 0 ~ 255, the default value is 128.
CONV: YES or NO.
REC: YES or NO.
g.
Advance Menu: DETECTION
Move the cursor to “DETECTION” and press ”ENTER”. The screen will show the following options:
DETECTION SETUP
1.
TITLE:
Show the title of each camera channel.
CAMERA
TITLE
BRIG
CONT
SATU
HUE
COV
REC
01
110
128
128
128
NO
YES
02
110
128
128
128
NO
YES
03
110
128
128
128
NO
YES
04
110
128
128
128
NO
YES
PRE
NEXT
DETECTION
TITLE
DET
AREA
LS
SS
TS
RE
ALARM
01
ON
SETUP
07
03
02
10
OFF
02
ON
SETUP
07
03
02
10
LOW
03
ON
SETUP
07
03
02
10
HIGH
04
ON
SETUP
07
03
02
10
OFF
PRE
NEXT
DETECTION
DETECTION SETUP
DETECTION TIMER
