DCM267N
V. 02 – 20/08/2018
37
©Velleman nv
Ponga el termopar durante ± 30 segundos en el objeto que quiere medir.
Se visualizan el valor y la polaridad de la punta roja
[8]
.
No gire el selector de función si el termopar está conectado a la pinza
amperimétrica.
10.
La pila
Reemplace las pilas en cuanto se visualice la indicación de pila baja.
Desconecte las puntas de prueba antes de reemplazar las pilas. No utilice
una pinza amperimétrica sin pilas.
Desatornille el tornillo de la parte trasera de la pinza amperimétrica para
abrir el compartimiento de pilas.
Saque la pila e introduzca una nueva pila. Respete la polaridad. Utilice sólo
pilas idénticas.
Cierre el compartimiento de pilas.
Saque las pilas después del uso.
Nunca recargue pilas alcalinas. No eche la pila al fuego
.
¡OJO!: Respete las advertencias del embalaje. Mantenga las
pilas lejos del alcance de niños
.
11.
Especificaciones
tensión CC
0,4/4/40/400/600 V
precisión básica
±(1,5 % l 3 dígitos) / ±(0,8 % l 3
dígitos) para el rango de 0,4 V / ±(2,0 % l
3 dígitos) para el rango de 600 V
impedancia de
entrada
7,8 MΩ
entrada máx.
600 V
tensión CA
0,4/4/40/400/600 V
precisión básica
±(1,8 % l 5 dígitos) / ±(0,8 % l
20 dígitos) para el rango de 0,4 V / ±(2,5 %
l 5 dígitos) para el rango de 600 V
impedancia de
entrada
7,8 MΩ
rango de frecuencia 50~60 Hz
entrada máx.
600 V
corriente AC
40/400/1000 A (tensión de red máx. 240 V)
precisión básica
±(2,5 % l 10 dígitos) para el rango de
40 A / ±(2,5 % l 5 dígitos) para el rango
de 400 A / ±(3,0 % l 4 dígitos) para el
rango de 1000 A