DCM267N
V. 02 – 20/08/2018
56
©Velleman nv
przewody pomiarowe do testowanego kondensatora i odczytać wartość z
wyświetlacza LCD.
POMIAR CZĘSTOTLIWOŚCI I WSPÓŁCZYNNIKA WYPEŁNIENIA %
Podłączyć czerwony przewód pomiarowy do gniazda "V Ω °C/°F"
[10]
, a
czarny do gniazda „COM"
[9]
.
Ustawić pokrętło
[3]
w pozycji "Hz·%". Wybrać Hz lub współczynnik
wypełnienia % za pomocą przycisku wyboru Hz - %
[6]
,
wybrana opcja
wyświetli się na ekranie.
Podłączyć przewody pomiarowe do testowanego obwodu i odczytać
wartość z wyświetlacza LCD.
TEMPERATURA
Ustawić pokrętło
[3]
w pozycji "°C·°F". Wybrać °C lub °F przyciskiem
wyboru trybu
[5]
,
wybrana opcja wyświetli się na ekranie.
Umieścić końcówkę adaptera sondy temperaturowej oznaczoną “+” w
gnieździe "V Ω °C/°F"
[10]
a drugą (“-”) w gnieździe "COM"
[9]
.
Przytrzymać sondę pomiarową w pobliżu testowanego urządzenia przez
±30s i odczytać wartość z wyświetlacza LCD.
Nie
obracać pokrętła wyboru funkcji, jeżeli do miernika podłączona jest
termopara.
10.
Bateria
Wymienić baterię, gdy wyświetli się wskazanie niskiego poziomu baterii.
Zawsze
odłączać przewody pomiarowe podczas wymiany baterii.
Nie
używać urządzenia bez zamontowanych baterii.
Pokrywa baterii znajduje się z tyłu urządzenia i jest zamknięta za pomocą
pojedynczej śruby. Odkręcić śrubę i otworzyć gniazdo baterii.
Wyjąć baterię i podłączyć nową 9V zgodnie z oznakowaniem
biegunowości na uchwycie. Należy stosować wyłącznie baterie tego
samego typu i specyfikacji.
Ponownie zamontować pokrywę baterii i przykręcić śrubę.
Jeśli urządzenie nie będzie używane przez dłuższy okres czasu, należy
wyjąć baterie, aby zapobiec ryzyku wycieku.
Nie ładować baterii, które nie są akumulatorkami i nie wrzucać baterii do
ognia, ponieważ mogą wybuchnąć.
OSTRZEŻENIE: zachować ostrożność podczas postępowania z
bateriami, przestrzegać ostrzeżeń podanych na obudowie
baterii. Usuwać baterie zgodnie z lokalnymi przepisami. Baterie
należy chronić przed dziećmi.