CCTVPROM7
14/07/2010
©
Velleman nv
8
Motion
schedule
•
Select the channel for which to schedule motion
recording.
•
The grid is divided into 24 hours (horizontal) and 7
week days (vertical). E.g. when the 4
th
square on the
second row is selected (red) than the indicated channel
will be recorded when motion is detected every Tuesday
from 3AM until 4AM.
•
Click on ‘
APPLY TO
’ to apply the setting to the
indicated channel. Select a different channel to apply
the same settings to that channel.
•
When finished, click
OK
to save or
CANCEL
to exit
without saving.
PTZ (Pan Tilt Zoom)
•
Select the video channel to set-up.
•
Set the PTZ communication address (00~99).
•
Select the PTZ protocol: Pelco-D, Pelco-P, B01, Samsung etc. ….
•
Select the baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600
or 115200.
•
Click on ‘
APPLY TO’
to apply the setting to the indicated channel.
Select a different channel to apply the same settings to that channel.
•
When finished, click
OK
to save or
CANCEL
to exit without saving.
PTZ controls
•
Select the video channel.
•
Select Direction, Focus, Zoom, Iris or Automatic.
Depending on the selection options change.
•
Use the Up/Down/Left/Right buttons to move the
camera.
•
Set the speed of the camera: slow, normal or fast.
Log management
•
Select the type of log: Operation or Alarms
•
Set start and end date and time for the search function.
•
Click on
SEARCH
. An overview of all logs is shown.
•
Use the
PREV
and
NEXT
buttons to scroll through the
pages.
CANCEL
to return to the previous menu.
•
Press
CANCEL
again to exit log management.
System settings
•
There are 6 submenus:
o
Configure
o
Password
o
Date&Time
o
Default
o
Reset
o
About
