CCTVPROM7
14/07/2010
©
Velleman nv
6
7.3 Menu options
•
Following menu options are available:
HDD – Record – PlayBack – Motion – PTZ – PTZCtrl – Log – System
HDD
•
Select ‘Overwrite’ (X) to automatically overwrite the oldest data
when the disk is full. Deselect (empty) to disable this function.
•
The status and capacity of the hard disk are shown.
•
Select
OK
to save and exit, select
CANCEL
to leave the hard disk
menu without making changes.
•
Select
FORMAT
to clear all data on the hard disk. A warning is
displayed that all data will be lost. Press
OK
to continue or
CANCEL
to exit.
Note:
format will not work when the DVR is recording.
Record
There are 3 submenus under the record menu.
•
Select the channel to set-up.
•
When desired, customize the channels name (up to 8
characters).
•
Set the channel quality: lowest, low, middle, high or
highest.
•
Set the number of frames per second: 1, 3, 5, 8, 13 or
25.
•
Set the brightness, contrast and saturation: 0~99
(default = 50).
•
Click on ‘
APPLY TO
’ to apply the setting to the indicated
channel. Select a different channel to apply the same
settings to that channel.
•
When finished, click
OK
to save or
CANCEL
to exit
without saving.
•
Select the channel for which to schedule continuous
recording.
•
The grid is divided into 24 hours (horizontal) and 7 week
days (vertical). E.g. when the 4
th
square on the second
row is selected (red) than the indicated channel will be
recorded continuously every Tuesday from 3AM until
4AM.
•
Click on ‘
APPLY TO
’ to apply the setting to the indicated
channel. Select a different channel to apply the same
settings to that channel.
•
When finished, click
OK
to save or
CANCEL
to exit
without saving.
•
Set the status of a channel to ‘X’ to manually start recording the
images of that channel. Set to ‘empty’ to stop recording
manually. During recording, a red dot is shown at the bottom of
the channel.
•
Note that manual recording will not start when the hard disk is
full or not present or not formatted.
•
When finished, click
OK
to save or
CANCEL
to exit without
saving.
