CAMSETW1
3
VELLEMAN
5. Installing Other Applications
a) Video Recordings
Connect the monitor with a video recorder via the A/V output jacks in order to make recordings: connect the yellow
and white plugs of the A/V cable with the yellow and white input jacks of the video. Make sure the colours match.
b) Night Vision
The camera is equipped with 8 LEDs enabling the user to record clear images in low-light conditions. Put the switch
at the back of the camera in the NIGHT position to activate the night vision function. Deactivate this function when
you don't need it in order to limit consumption.
c) Audio Recordings
You can turn off the screen so that only sound is recorded. Just press the ON/OFF button on the front panel of the
monitor.
6. Orienting the Camera and the Monitor
Place the camera and the receiver on a flat and stable surface. Place the devices as high off the ground as possible
so their operation will not be impeded by people walking between the camera and the monitor.
Microwave ovens can cause interference. Make sure there is no microwave oven between the camera and the
monitor.
Make sure the front of the A/V antennas of the camera and the monitor are aimed towards each other. There is no
need to raise the antennas if camera and receiver are less than 3m apart.
Remark : The A/V antennas were designed to be able to rotate but their rotation range is still limited. The antenna
and the stopper will both be damaged irreparably if you try to rotate the antennas too far.
7. Auto Sequence Function for Monitoring Multiple Locations
The built-in auto sequence function is ideal for security purposes. The receiver is equipped with 4 channels and uses
up to 4 cameras. It displays the picture of these 4 cameras sequentially on 1 single monitor. Several settings are
available for the monitor thanks to the DIP switches. In the default setting only the first DIP switch is in the ON
position.
DIP switches 1 through 4 set the auto sequence function of the channels. Place the switch of the channel you want to
display in the ON position. Switch 5 sets the time in between sequences : ON switches channels every 8 seconds,
OFF switches every 4 seconds.
Remark :
The monitor automatically detects the receiving channels and displays them in sequence. One single channel is
received continuously if the switch for that channel is the only one to be placed in the ON position, regardless of the
position of the fifth switch. If more than 1 channel has its switch in the ON position, then the auto sequence function
will work for the activated channels.
The monitor automatically sets channel 1 as the receiving channel if not a single channel switch is in the ON position.
