CAMCOLD4_v2
VELLEMAN
9
time is 1 minute. The remaining time will be displayed on screen in a percentage. Save the
pattern using the F- key. Cancel the pattern using the F+. You can also use the OSD menu.
Running a pattern: Choose a pattern (1~4) and press the SAL key.
Deleting a pattern: Use the OSD menu.
•
Group
Function: The group function allows you to run a sequence of presets, patterns or swing movements. You can store
up to 8 groups each with a max. of 20 actions. The group can be created, modified or deleted using the
menu. The dwell time defined in the preset is effective when the group is running.
Setting the group: Use the OSD menu.
Running the group: Press a numeric key (21~28) to choose the group and press the SAL key on the controller.
Example: If your group number is 5, press 25 and the SAL key.
Deleting a group: Use the OSD menu.
•
Other functions
Power-up action: This function enables you to recover the last action before the camera shut down.
Auto-flip 180°: If the tilt angle exceeds 90°, the pan is automatically moved into the opposite direction so the target is
continuously tracked.
Park action: This function enables you to point the camera at a specific target. The interval can be defined from 1
minute up to 4 hours.
Original position: Define the original position. The pan angle can be modified changing the original position. However,
the tilt angle will not be affected.
Alarm I/O: Using the optional alarm I/O module, 8 alarm inputs and 4 outputs will be available. If an external sensor is
activated, the camera can be set to move to a preset position. The output relay can be programmed to
take actions as e.g. turning on the light or activating the alarm. Note that the latest alarm input is effective
if multiple sensors have been activated.
Privacy mask: To ensure the privacy, you can create up to 8 white masks so objects such as windows can be hidden.
The OSD Display of the Main Screen
PTZ information: Current pan/tilt angle in degrees and zoom
magnification.
Camera ID: Current camera ID.
Preset table: The label stored for a specific preset.
Action title: SPRESETxxx: Preset xxx is stored.
PRESETxxx: Camera has reached preset xxx.
UNDEFINED: Ana undefined preset number is
called.
SWINGxxx: Swing xxx is active.
Alarm Information: Current state of the alarm I/O. Example above: Output 1 is active, inputs 2 and 5 are active.
General Rules when Operating the Menu
•
Menu items between
(
brackets
)
always have a submenu.
•
To access a submenu, press F-, to exit the menu press F+.
•
Use the joystick (up, down, left or right) to move from item to item.
•
Confirm pressing F-.
•
To modify a value, use the joystick (up, down, left or right), press F- to save the modification or press F+ to
cancel.
Summary of Contents for CAMCOLD4
Page 2: ......