- 7 -
Construction
* metalfilm resistor !
This educational LCD oscilloscope consists of three parts: the base PCB, the display PCB and the rear panel. First
we assemble the display pcb and then the base PCB. On the display module we mount components on both sides.
We start at the solderside and finish with the components on the component side.
R1 : 220Ω (2 - 2 - 1 - B)
R2 : 560Ω (5 - 6 - 1 - B)
R3 : 1KΩ (1 - 0 - 2 - B)
R4 : 1K1
(1 - 1 - 0 - 1 - 1)
*
R5 : 2K4
(2 - 4 - 0 - 1 - 1)
*
R6 : 10KΩ (1 - 0 - 3 - B)
1
Vertical resistors
Display PCB
R...
Solderside
2
Ceramic Capacitors
C1 : 1µF (105)
C2 : 1µF (105)
C3 : 1µF (105)
C4 : 1µF (105)
C5 : 1µF (105)
C6 : 1µF (105)
C7 : 1µF (105)
C8 : 1µF (105)
C9 : 1µF (105)
C10 : 1µF (105)
3
Female header
SK1 : 18pins
1
Push buttons
SW1
SW2
SW3
SW4
SW5
SW6
2
LCD
Component
Side
Be careful when soldering the LCD
connections. Overheating will damage
the LCD screen.
!
A. CONSTRUCTION
Bend the ceramic
capacitors
Summary of Contents for EDU08
