Appendix C — Filter Manager Error/Status Codes
139
Filter Manager Error/Status Codes
-609
Invalid First-Video-Line setting.
For non-VBI encodes, it
must be set to 20, 21, or 22.
-610
Argus VTR configuration error. Attempted to turn
on VTR control when Registry indicated that VTR
is not installed.
Check EncodeConfig Regis-
try. Turn on VTRInstalled
flag if you intend to use the
VTR.
-611
Unable to create mutexes for video component.
System error? Check task
manager.
-612
Unable to create IBM video COM component.
Make sure IBMVideo com-
ponent is registered.
-613
Exception thrown during IBM Video initialization.
-614
Error occurred during IBM Video stop procedure.
This may result in (or may
have resulted from) “hung
up” encode. May need to
terminate it.
-615
Error occurred with IBM-video pause command.
-616
Error occurred with IBM-video resume command.
-617
Unable to create mutexes for IBM Audio
component.
-618
Error occurred during IBM Audio stop.
-619
Error occurred with IBM Audio Pause.
-620
Error occurred with IBM Audio Resume.
-621
Error occurred with IBM Audio Reset.
-622
Failure communicating with VSP hardware.
Check seating of encoder
board. Run diagnostics.
-623
Failure mapping VSP.
Check seating of encoder
board. Run diagnostics.
-624
VSP driver “open” command failed.
Check seating of encoder
board. Run diagnostics.
Filter Manager Error/Status Codes (Continued)
Error Code
Meaning
Comments
Table C-1. Filter Manager Error/Status Codes (Continued)